Wii usb/hdd loader info

[venomhotboy]

Hi

I just wanna share this great new homebrew and I love so much and I want all techjamiacan's who have a modded or unmodded wii to try this out. You can ask questions i have mastered this. Also it's very very simple



This guide will show you how to use USB loader to backup and boot games from a USB drive.

First, what's required;
-Newest Homebrew Channel installed
-This file pack (v1.1+IOS rev 9) http://rapidshare.com/files/216277961/apps.rar
-The original IOS36-64-v1042.wad file (GOOGLE!)

Prep:
-Extract the usbloader.rar file into the root of your SD card.
-Stick the IOS36-64-v1042.wad file into the root of the SD card.
-Boot the Homebrew Channel, run the IOS installer
-Select "WAD Install", it should install automatically
-Reset Wii

Running USB loader:
-Insert a USB drive into the Wii
-Boot the homebrew channel, select USB-LOADER


-It should ask you about formatting and choosing a partition.

This WILL erase everything on your USB drive, so be sure to back it up. Yes, the USB drive can be converted back to normal later, it's no big deal. Windows will however, not be able to read your USB drive while it's formatted under the WBFS.

-Choose your partition and continue.
-Insert the game disk (original or backup) into your Wii, and press the + button.

What It should say;
QUOTE
Opening dvd disk.. OK!"


Then it will proceed to carry on with the ripping operation.


Troubleshooting:

Q: When installing the IOS file, i get "extracting content #00... ERROR! (ret = -1017)"?
A: Use AnytitleDeleter to get rid of ISO249.

Q: When I boot USB Loader, I get: Could not initialize USB subsystem! (ret = -1) ?
This means either your USB drive is corrupted or it is not supported. Please use another drive or doublecheck connections. Also, if you have something plugged in the other USB port, be sure to remove it. If all that doesn't work, try switching your USB port. Some people reported this working via hotswapping, but I do not support this method. Other people are reporting that plugging two errored USB's in at once makes one work.

Q: While in the ripping process, it freezes. (I got passed 0.01%)
A:Mine did this, but because my flash drive was overheating. It sounds ridiculous, but try keeping it cooled off. Or if you have another flash drive, try that.
If your flash drive has an LED and it's still blinking, leave it be, it's just running slow! If it's stopped blinking for more than 40 seconds you'll need to reset your Wii. Also, sometimes it wont work the first time, but works great the second or third.

Q: When I go to rip the disk, it freezes at 0.01% or 0.00%?
A:If your Wii is hard modded, I don't have a solution for you :[..but if it isn't, try reinstalling the IOS file or cleaning your disk.

Q: When I go to rip, it says "Invalid Wii game"?
A: You're most likely using a backed up game or a ligit scratched game. Clean the DVD, try a few more times. If that fails burn another copy.

Q: WTF's a partition?
A: The best way to describe it, is a segment of your hard drive that is reserved for one file system. Most computer come with the entire hard drive as one partition, but you can split hard drives into multiple partitions for better organization or different file systems.

Q: How do i turn my USB device back compatible with windows?
A: Using XP, right click "My computer" and go to "Manage" while your USB drive is connected. Click "Disk Managment". Right click your device and format or create a new partition.

Q: I know what a partition is, is there any way for me to repartition my drive without loosing current data?
A: Unfortunately, there's no easy way to just repartition without deleting previous partitions that I know of.
[EDIT: Apparently you can use Partition Magic, but I have no experience there]

Q: Can i dump Gamecube games?
A: No. Im sure it'll eventually be supported, but not at this time.

Q: It says that there's only x.xxgb's avaliable, but I have a lo tmore space than that!!
A: Either you messed up with the Partitioning, or you're not using my USB Loader pack.

Q: Do I need FW v4.0?
A: Nope.

Q: Can I put the ISO on my Hard drive through Windows?
A: Yes, the WBFS Tool.

Q: How big are the Wii games and how long do they take to dump?
Most games take under 20 mins to dump, except Super Smash Bros Brawl. Here's some examples.
The Legend Of Zelda: Twilight Princess :::: 1.12gb :::: 13 mins
Link's Target Training :::: 0.25gb :::: 3 mins, 25 seconds
Wii Sports :::: 0.36gb :::: 5 mins, 13 seconds
Super Smash Bros Brawl :::: 6.87gb :::: 1 Hour, 34 minutes, 8 seconds

Q: My disk drive is really loud and making weird noises!!
A: Don't worry about it. The noise amount varies between models and use.

Q: My picture is black and white / distorted / Grainy / ect?
A: It's cross-video compatibility. Some PAL games work great on NTSC consoles, others dont, and vise versa. There's been numerous reports of fixes and video patches, and forcing NTSC, but nothing is clear yet.

Q: Does this include USB 2.0 support?
A: Yes

Q: Does usb loader dump brickblocked backup discs?
A: Yess.

Q: How big can my partition be?
A: 512gb max for now.


This covers every problem people had through the first ten pages, so you won't need to scan through the topic too much :x..Hope this was some help.



Special Thanks to Darkzero51521 at GBATemp.net

Everyone Check this out.

USB Loader GUI-FX
Video: http://www.youtube.com/watch?v=flA3rojAo4g

YouTube - USB Loader GUIFX


Here is a first version release of this GUI.
Any improvement ideas are welcome.
Thanks!

Features:
- browses games on USB hdd
- loads game by point and push A
- home gets back to loader
- covers are loaded from sd
- has wait timeout to allow hdd/stick reinsertion

Instructions:
extract contents of SDroot folder to SD:\

Download here: USB Loader GUI-FX http://uploaded.to/file/jjx4cj
Due to alpha version, please do not mirror it.
a new version will replace it soon.
Have fun.

Filesize: 32.6MB,

WII CAME AND WII CONQUER!!!

13-04
New version added.
http://ul.to/cuu8px


GUI performs as in this video:
http://www.youtube.com/watch?v=Zio5HP3-MEQ


Remember, covers go in folder SD:\coperti\
coversize is 160x224 due to wii graphic processor
Use the covers from alpha1 package.

If you use the usual 160x225 covers, the loader will not work!

wii came and wii conquer

[phenom]

i currently have v1.4

[phenom]

what i want to know will this let me download games n play them on my wii?

[venomhotboy]

Yes you can download games and play them on the wii. But first you must have homebrew channel to load the usb loader channel or dol files. Then you can download any iso from the internet and copy them to the hard drive. YOu will need a special program for the hard drive it's call WBFS (wii backup file system) it's very easy and no wii game is at the full 4.7 gig. most of them is under 3 gig so you will have all the space.

Version 1.4 is not stable so i don't recommend it. Stick with version 1.1 until all the bugs are sorted out and the later version.


Venom

[phenom]

hmm i have wbfs on system already just havent tried it on my wii yet

would also like to know if it might make nintendo ban u from their updates etc

[Nestersan]

Good Stuff, might convince the skirt to try it.

[semitop]

PS3 get lef behind so far

[venomhotboy]

Unfortunately when you copy the wii games on the hdd no updates are copy. Also I don't recommend to update your wii firmware to 4.0 Stick to 3.2 or 3.3. If you have 3.4 you are also limited. If you must update to 4.0 there is a special mod that let you still have all the mod and channels I will update the link here later.

You will not be banned from nintendo because right now nintendo does not know if you are using the disk or an hard drive.

Please also note that it was from NINTENDO idea that Wanniko got the idea from with the hard drive. In every hospital for children and elders in the US there is a wii system with hard drive in them. NINTENDO states that the solution is not for the public. Hence the birth of the homebrew. Man I LOVE THIS. I finally finish tenchu. My disk was giving error reading but from the HDD capabilities it work flawlessly

"WII CAME AND WII CONQUER!!!


Venom

[**ScarFace**]

u can use the custom 4.0 firmware which the same guy who release the wii hdd loader to update ur wii

Originally Posted by semitop

PS3 get lef behind so far

lol u just dont know yet ps3 go get the madest hack save the best for last

[venomhotboy]

Yes you can. But i still dont recommend it yet. There are some bugs and issues that need to be sort out properly. I did the upgrade by wanniko but then i downgrade it back. I think the 3.2 works flawlessly.

The 4.0 only have SDHC support and we can do that now with rev 10.


Regards
venom