Techie
U will be ok
Like everything else in life there is a first time for everything..experience comes through learning so u have to have an open mind yes there might be mistakes but u learn and move on...go in with a positive attitude.
There are also a lot of resources to be found online...google is ur best friend.Magazines like maximum pc and Pc World are good too...oh and lastly u might want to pick up a copy of ''Upgrading and Repairing PC's.
Good luck bro... i know u will be ok
MSI NF750-G55 Motherboard , AMD Athlon II X3 445 Rana 3.1 GHz ,
Corsair XMS3 4GB 2 X 2 GB PC3-10666 ,Seagate Barracuda 500 gb HDD , Nvidia GT520 , Acer 20'' LCD Monitor
I do have a DVD on upgrading and repairing pc's..thanks for the reminder....as u said that.
Well I'll do all the research I need to do...I'll update you guys at the end of each week.
Ultimate Techie
Make sure you tell we how the first day on the job was;
|--- www.RealJamaicaEstate.com ™ ---|
Invest small = small returns [micro enterprise] | Invest Big = returns Big [macro enterprise]
--- www.fashionsJAMAICA.com ™ -|- www.ChampsJamaica.com ™
Ultimate Techie
BTW. when is your first day?
Back to square one....., back off the ground now........
Ultimate Techie
He said tomorrow, Monday.Originally Posted by danthony
|--- www.RealJamaicaEstate.com ™ ---|
Invest small = small returns [micro enterprise] | Invest Big = returns Big [macro enterprise]
--- www.fashionsJAMAICA.com ™ -|- www.ChampsJamaica.com ™
Ultimate Techie
oh seen............ well, i wouldnt be too worried if i were you. dont think you gonna have much to do. although anything can happen.
all the best!!!
Back to square one....., back off the ground now........
Well normally first day on the job isn't much to do....just basically the introduction sorta...what ya must do and what not to do...that sort of thing...then the next day is the real thing...
No problem...I'll let y'all know how the first day go....
Hardcore Techie
mi bredda don`t worry about it....the rest switches and pwr led hdd led are usually silkscreened (printed on da board) nowadays boards have a mechanism where if they are connected incorrectly if not then there is an industry standard done by intel......would be nice to know da industry standard usb pinout by intel also then u good to go
H E L T A - S K E L T A...........Simple but Effective
Certified Wifi Penetration Specialist
CompTIA A+ Certified
Hardcore Techie
True that but like older machines you have to trial and error it out Jah nuh worry yuhself
oh rahtid but anuh today is your first day on the job keep us posted
Email : malco1987@hotmail.com| LIME :342-9787 | DIGICEL : 406-4604
One Stop Software Downloads
www.filehippo.com
Update on today....
It was a boring day...nah lie...just sitting in the technician room for 30mins or more until there is another task to be done.
But to recap on what I really did for the day...just to install couple software on a built system (Windows XP Prof, Microsoft Office, Drivers from the Intel cd...(I didn't build it)...but I was told to keep an eye as to what is going on. So I guess tomorrow (tuesday)...I would get into that.
What I need to familiarize myself with are:
1. Setting up category 5 cable with the ends
2. Building a system, focussing mainly on setting up the Led wire, RESET wire....etc..as well as learning what processor goes for the brand mobo.
3. Being able to solve software related problems without formatting...even if it is virus that are hard to remove...
I think those are basically what i need to know.
Posting Permissions
Reply With Quote