Originally Posted by
The One Free Man
Line Rate - Upstream (Kbps): 384
Line Rate - Downstream (Kbps): 3072
Bandwidth Up/Down (Kbit/sec) 381 / 3071
my 2 connections respectively
Hi .. nice stats, could you provide us with a bit more information? I am particularly interested in what line modulation CWJ is using for this upgrade. The old pppOa packages used DMT (ANSI G.992.1) as you see in my telnet session here. Does your package use a different line modulation eg Adsl2+ ??
you can check my telneting to your modem :
Code:
Username : Administrator
Password : *******
------------------------------------------------------------------------
______ SpeedTouch 5x6
___/_____/\
/ /\ 5.4.0.14
_____/__ / \
_/ /\_____/___ \ Copyright (c) 1999-2005, THOMSON
// / \ /\ \
_______//_______/ \ / _\/______
/ / \ \ / / / /\
__/ / \ \ / / / / _\__
/ / / \_______\/ / / / / /\
/_/______/___________________/ /________/ /___/ \
\ \ \ ___________ \ \ \ \ \ /
\_\ \ / /\ \ \ \ \___\/
\ \/ / \ \ \ \ /
\_____/ / \ \ \________\/
/__________/ \ \ /
\ _____ \ /_____\/
\ / /\ \ /___\/
/____/ \ \ /
\ \ /___\/
\____\/
------------------------------------------------------------------------
{Administrator}=>adsl info
Modemstate : up
Operation Mode : ANSI G.992.1 Annex A
Channel Mode : interleaved
Number of resets : 1
Vendor Local Remote
Country : 0f 00
Vendor : TMMB VendorSpecific :
0000 0000
StandardRevisionNr : 00 00
Downstream Upstream
Margin [dB] : 30.5 15.0
Attenuation [dB] : 47.5 31.5
OutputPower [dBm] : 17.5 11.0
Intrinsic/Actual Bandwidth %
Upstream : 33
Downstream : 14
Available Bandwidth Cells/s Kbit/s
Downstream : 2415 1024
Upstream : 603 256
Transfer statistics
Errors
Received FEC : 0
Received CRC : 0
Received HEC : 0
Transmitted FEC : 0
Transmitted CRC : 0
Transmitted HEC : 0
Near end failures since reset
Loss of frame: 0 failures
Loss of signal: 0 failures
Loss of power: 0 failures
Errored seconds: 0 seconds
Near end failures last 15 minutes
Loss of frame: 0 seconds
Loss of signal: 0 seconds
Loss of power: 0 seconds
Errored seconds: 0 seconds
Near end failures current day
Errored seconds: 0 seconds
Near end failures previous day
Errored seconds: 0 seconds
{Administrator}=>
thanks in advance..
Rx