Connecting multiple TVs to a computer

**Zard** · May 24, 2005, 05:08 PM

ok i know it's a bit far-fetched

but is it posible to connect multiple TVs to a PC and be able to turn them on and off using the computer with any special software or sensors etc?

**twistakid** · May 24, 2005, 05:45 PM

well i guess it would depend on how u would like connect the two tv, cause u can have two tv showin the same image with jus a jus a splitter, use the svideo converter to rca then u a rca splitter and then u criss,

to show two different images on two tv connect to one pci usin on vid card not sure about how u would go about doin that

**Zard** · May 24, 2005, 06:24 PM

i want multiple TVs on a grander scale like up to 10

basically i want to interface with the TV through the computer as much as posible without using the tv remote

**GodKid** · May 24, 2005, 08:56 PM

hmmm... on/off is troublesome but otcwireless (http://www.otcwireless.com) makes a product that does the multi-monitor thing.

If you're interested you can drop a link at info@digisolvit.com

**Zard** · May 24, 2005, 09:55 PM

good link GK

but i want multiple television screens not computer monitors

**Krems** · May 24, 2005, 11:05 PM

you'd need a couple S-video splitters i think....

i havent seen anything more than a 3 way one...

**erbag** · May 25, 2005, 11:20 AM

Zard let me see if I get you!?! You want the output from the PC to go to as many monitors as possible and a way to turn off all TVs from the PC without having to use a remote?

As far as connectivity goes that is possible...but trning them off using a pc...that's tricky...I've had some experience operating a system that gives feed from a PC to TVs and what we did was buy the SAME BRAND of TVs...use one remote and turn them off. We created another system and replaced the TVs with 17" Monitors and we still have to MANUALLY turn on/off the monitors...hence my reason for saying that it may not be possible...

for Splitters and other products CLICK HERE

**Zard** · May 25, 2005, 11:34 AM

Originally Posted by erbag

Zard let me see if I get you!?! You want the output from the PC to go to as many monitors as possible and a way to turn off all TVs from the PC without having to use a remote?

basically thats it

what i want displayed on the TVs are like logos and vids etc which would be fed from the PC....but I also what each TV to be able to display it's own stuff independent of the PC or the other TVs at times

checking out ur link

**erbag** · May 25, 2005, 11:53 AM

just in case u have probs viewing the site peep this page CLICK HERE...I'll see what else I can find out and holla at ya!

**Zard** · May 25, 2005, 12:17 PM

Originally Posted by erbag

just in case u have probs viewing the site peep this page CLICK HERE...I'll see what else I can find out and holla at ya!

yep that site difficult to browse......going through it though

Thread: Connecting multiple TVs to a computer

Thread Tools

Connecting multiple TVs to a computer

Posting Permissions