Results 1 to 3 of 3

Thread: Arris Touchstone TG1672 Telephony Gateway to bridge mode

  1. #1
    Join Date
    Sep 2006
    Posts
    30
    Rep Power
    0

    Default Arris Touchstone TG1672 Telephony Gateway to bridge mode

    Hi Guys

    We have a Arris Touchstone TG1672 Telephony Gateway and wanted to put it in bridge mode so that we can use a 3-piece mesh system as the gateway instead.
    If we put the TG1672 in bridge mode will it break the flow telephone line we also have that's connected to it?
    Planning on following this instruction: https://www.youtube.com/watch?v=tZPNukkbYCI

    Thanks in advance.

  2. #2
    Join Date
    Sep 2006
    Posts
    1,219
    Rep Power
    0

    Default

    I don't think it should. It is probably in bridged mode already I think. I don't remember the password to mine so I cannot check.
    AMD Phenom II X4 960T Zosma @ 4GHz | Thermalright Ultima 90 CPU cooler | GIGBABYTE GA-MA790X-UD4P | Sapphire 6950 unlocked | 6Gb Gskill RAM | 1.5TB total HD | Dell U2412M IPS Monitor | Zalman 750W PSU | LENOVO SL500

  3. #3
    Join Date
    Sep 2006
    Posts
    30
    Rep Power
    0

    Default

    Yes Flow told me it would not get affected. Any instructions you followed that worked for you? Followed that Youtube video I mentioned earlier but any 3rd party router I try won't connect to the internet..

    Thanks.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •