
Originally Posted by
WanabeR
Any wireless router should work with the either the adsl modem or the cable modem. You just have to make sure that the cable modem associates itself with the mac address from the router by doing a battery pull and power cycle or using the reset button. It is really simple to setup.
Agreed with above. Reset the FLOW modem either before or while it's connected to the router. Do the battery+power pull (unplug) if your modem has a battery. Reset the Solaris just to be on the safe side. Setup whatever config/security you need on the router after and you should be fine.
We never know too much that we can't learn. Unfortunately most Jamaicans are about "hurry come up" and swatting than actually learning....