PDA

View Full Version : inside the Digicel 4G CPE Wimax Modem



richard_lyew
September 13, 2010, 03:48 PM
This is a look inside the Digicel 4G CPE wimax modem

The mainboard

http://img255.imageshack.us/img255/9352/dscf3772.th.jpg (http://img255.imageshack.us/i/dscf3772.jpg/)

the CPU

http://img217.imageshack.us/img217/7762/dscf3832.th.jpg (http://img217.imageshack.us/i/dscf3832.jpg/)

http://www.beceem.com/images/BCS5200_prodbrief.pdf
http://www.beceem.com/wireless_apps.html

the RAM (GDDR2 512MB)

http://img688.imageshack.us/img688/2566/dscf3804.th.jpg (http://img688.imageshack.us/i/dscf3804.jpg/)

http://www.hynix.com/datasheet/eng/consumer/details/consumer_03_H5PS5162FFR.jsp?searchType=2&menuNo=1&m=2&s=1&RK=03&RAM_NAME=

the Flash memory (512MB)

http://img39.imageshack.us/img39/8943/dscf3856.th.jpg (http://img39.imageshack.us/i/dscf3856.jpg/)

http://www.hynix.com/datasheet/ShortForm/4Q07_ShortFormCatalog_NANDFlash.pdf

the Lan controller

http://img227.imageshack.us/img227/1755/dscf3817.th.jpg (http://img227.imageshack.us/i/dscf3817.jpg/)

http://www.datasheetcatalog.org/datasheets2/17/1785381_1.pdf


Transmitter and Receiver

http://img714.imageshack.us/img714/6241/dscf3831m.th.jpg (http://img714.imageshack.us/i/dscf3831m.jpg/)

http://www.edom.com.tw/vender/product/Si3215_Data_Sheet_1.pdf
http://www.edom.com.tw/vender/product/Si3215_Data_Sheet_1.pdf
http://www.silabs.com/products/voice/slic/Pages/Si32xxProSLIC.aspx
http://www.silabs.com/pages/DownloadDoc.aspx?FILEURL=Support+Documents/TechnicalDocs/Si3215_Data_Sheet.pdf&src=ProductMatrix


With such a big flash chip, i think there are alot of room for a cooked firmware and maybe apps

rickyjazz
September 13, 2010, 04:05 PM
mawd so how the real 10mbps come into play... good post

richard_lyew
September 13, 2010, 04:42 PM
mawd so how the real 10mbps come into play... good post

these modems are wicked! them have alot of potential with alot of new up to the time chips. tweaking time!!!!!! not for me thou.

i want to make it clear to public that i do not modify or change any of Digicel's device(s) or try to harm the network in anyway whatsoever, also i have never take apart or disassemble any Digicel 4G CPE wimax modem or any Digicel device(s) or promote the acts of doing so. all picture(s) that i have post of Digicel device(s) being disassemble or disassembled are not my own or have anything to do with me in any way whatsoever. all the pictures were sent to me, they are NOT my own.

nuhsenutten
September 13, 2010, 04:53 PM
mad disclaimer!.......lol

richard_lyew
September 13, 2010, 04:57 PM
this might be a jtag or com port

http://img210.imageshack.us/img210/2720/dscf3815b.th.jpg (http://img210.imageshack.us/i/dscf3815b.jpg/)

the adapter that is used on these modems to act as the wifi router, is a USB wifi adapters and the flash store the drivers and settings for the operation of the wifi adapter. because it is a adapter operating as a ad-hoc router you might not be able to connect all wifi repeaters to it. its not a wifi router, just a wifi adapter playing the role as a wifi router.

more details coming soon.


mad disclaimer!.......lol

LMAO mi jus wa keep things clear. cant afford a lawsuit right now LOL and i have nothing to do with anything. i got the pics off the internet and the information of the chips from the manufacturers website and database etc...

i don't have anything to do with this. its just free information i feel i should share with the forum. EVERYTHING that i have shared can be obtained from the internet by anybody with access.

kalel17
September 13, 2010, 05:29 PM
Nice! You can drop alot of stuff into that... I pulled apart mine bit did not tinker with anything, I just added wires to the antennas to try and extend range.

I would surely warn against any attempted modding of this thing ITS POTENTIALLY DANGEROUS TO THE NETWORK! Messing up the code bits that tells it to interact with the system in a certain manner can damage the sites.

richard_lyew
September 13, 2010, 07:17 PM
Nice! You can drop alot of stuff into that... I pulled apart mine bit did not tinker with anything, I just added wires to the antennas to try and extend range.

I would surely warn against any attempted modding of this thing ITS POTENTIALLY DANGEROUS TO THE NETWORK! Messing up the code bits that tells it to interact with the system in a certain manner can damage the sites.

i know what you mean. like for eg. if someone (NOT Me :eusa_ange ) should edit their firmware and disable the OAM(Over-The-Air Mobile Device Management) feature and manage their device themselves. that would be bad for the network because they wouldn't have control over that device anymore.
http://www.smithmicro.com/products/device-management-suite.aspx

crosswire
September 13, 2010, 10:14 PM
This is a cool post........................:)

**ScarFace**
September 14, 2010, 08:36 AM
i know what you mean. like for eg. if someone (NOT Me :eusa_ange ) should edit their firmware and disable the OAM(Over-The-Air Mobile Device Management) feature and manage their device themselves. that would be bad for the network because they wouldn't have control over that device anymore.
http://www.smithmicro.com/products/device-management-suite.aspx


hmmmmm...........:eusa_thin

digimon
September 14, 2010, 11:14 AM
i know what you mean. like for eg. if someone (NOT Me :eusa_ange ) should edit their firmware and disable the OAM(Over-The-Air Mobile Device Management) feature and manage their device themselves. that would be bad for the network because they wouldn't have control over that device anymore.
http://www.smithmicro.com/products/device-management-suite.aspx
maaaawd.
I just read about it.
richard, u are a true techie

kalel17
September 14, 2010, 12:19 PM
All I want is for them to provide the source for the USB driver, we could then port it to linux and even mobile phones... plus it would be beneficial to them.

jamtech
September 14, 2010, 12:56 PM
Nice! You can drop alot of stuff into that... I pulled apart mine bit did not tinker with anything, I just added wires to the antennas to try and extend range.

I would surely warn against any attempted modding of this thing ITS POTENTIALLY DANGEROUS TO THE NETWORK! Messing up the code bits that tells it to interact with the system in a certain manner can damage the sites.

And you really told them....nice going......I would sue you first....lol......I can bet a mischievious person out there gets a clever idea....lol.

mega man
September 14, 2010, 01:05 PM
hehehehe you guys won't mod anything with digi, but i sure as hell will, when them network crash, i want to see them prove it in court say is me crash it, the jtag prt section catch mi eyes them still, already figured out the tx and rx data section, prob is a wonder waht kind a eeprom(tsop) chip them use as in how much space them have, these modems are begining to seem more and more interesting iyah

and nice find richard_lyew;)

kalel17
September 14, 2010, 01:05 PM
And you really told them....nice going......I would sue you first....lol......I can bet a mischievious person out there gets a clever idea....lol.

Lol its almost a guarantee that any1 who knows how to mod the firmware knows what its capable of.

Gnostic
September 14, 2010, 02:45 PM
mad.sick. I figured I wouldn't see the inside of one of these devices for atleast a year or so when people start getting a hold of damaged units.

I especially like that you added the links. Well done.

g2cris
September 14, 2010, 03:11 PM
these modems are wicked! them have alot of potential with alot of new up to the time chips. tweaking time!!!!!! not for me thou.

i want to make it clear to public that i do not modify or change any of Digicel's device(s) or try to harm the network in anyway whatsoever, also i have never take apart or disassemble any Digicel 4G CPE wimax modem or any Digicel device(s) or promote the acts of doing so. all picture(s) that i have post of Digicel device(s) being disassemble or disassembled are not my own or have anything to do with me in any way whatsoever. all the pictures were sent to me, they are NOT my own.

Hisses teeth, pop off back u one stripe. LOL

richard_lyew
September 14, 2010, 07:44 PM
All I want is for them to provide the source for the USB driver, we could then port it to linux and even mobile phones... plus it would be beneficial to them.

wait wait because i can get this for you. ok here is where someone (NOT me :eusa_ange ) have reached so far, he has edit the firmware and added a torrent client to the start-up plus added a USB port with drivers to connect almost any external HDD or USB storage media. also the firmware running on these modems are Linux based. the person doing the mods are about to add RAM to the modem and a heatsink to the CPU, the reason for the heatsink is for bringing the CPU clock higher, its not over clocking but the speed the modem's CPU is running at when you buy it, is only about half the speed it can run at.

the reason for the mod is so that you the owner of the modem wont have to leave your computer on downloading torrents. you will be able to just plug in your modem, it boots up with the torrent client ready and start downloading to your jump drive or other USB storage device. the torrent client is accessible via the GUI. the USB storage device connected to the modem is accessible via ip,FTP or Samba3 with secure login. plus the person doing the modding is adding more on board storage but its not a main issue right as the 512MB is a good amount to work with.


Hisses teeth, pop off back u one stripe. LOL

LMAO :D :D :D yu caaan guan, mi na give dem no room fi lock mi up LOL


mad.sick. I figured I wouldn't see the inside of one of these devices for atleast a year or so when people start getting a hold of damaged units.

I especially like that you added the links. Well done.

posting the links is the legally safer way to go as i am not posting my own words, i am only passing free information on to the public. :D

lorettagbr
September 14, 2010, 08:18 PM
LMAO :D :D :D yu caaan guan, mi na give dem no room fi lock mi up LOL

you can not be locked up for modding your own personal device that you paid for,there is no such law in this country

richard_lyew
September 14, 2010, 08:22 PM
hehehehe you guys won't mod anything with digi, but i sure as hell will, when them network crash, i want to see them prove it in court say is me crash it, the jtag prt section catch mi eyes them still, already figured out the tx and rx data section, prob is a wonder waht kind a eeprom(tsop) chip them use as in how much space them have, these modems are begining to seem more and more interesting iyah

and nice find richard_lyew;)

oh boy. its TSOP48. i post all the info and you still wondering bout the little things?
http://ae.rsdelivers.com/product/hynix/hy27us08121b-tpcb/flash-nand-512mb-x8-tsop-small-blk-3v/6686161.aspx

venomhotboy
September 14, 2010, 10:20 PM
Nice info yo... I want the mod that ur friend is doing! It would be good to get better speed when downloading :)

mega man
September 14, 2010, 11:27 PM
oh boy. its TSOP48. i post all the info and you still wondering bout the little things?
http://ae.rsdelivers.com/product/hynix/hy27us08121b-tpcb/flash-nand-512mb-x8-tsop-small-blk-3v/6686161.aspx

LOL, truthfully its after i posted i realized that it was tsop48, thanks for the heads up though and again "nice info"

richard_lyew
September 15, 2010, 04:01 PM
this is the type of processor inside the BCS5200 chip.

http://www.arm.com/products/processors/classic/arm11/index.php

they can run at 1Ghz no problem but before you set the clock to 1ghz make sure to add heatsink compound, heatsink and fan to it. you have been warned, dont burn your BCS5200 then cry.


LOL, truthfully its after i posted i realized that it was tsop48, thanks for the heads up though and again "nice info"

more info about the flash chip. you can use a memory like this http://ae.rsdelivers.com/product/hynix/hy27uf084g2b-tpcb/flash-nand-4gb-x8-tsop-large-block-3v/6686183.aspx as your flash chip if you need more space. you can get this memory out of a old iPod nano or wherever.

This is a good read
http://www.teyf.ir/Photos/WiMAXSeminar87/ZTE-wimax-teyf-conference.pdf

digimon
September 15, 2010, 04:13 PM
this is the type of processor inside the BCS5200 chip.

http://www.arm.com/products/processors/classic/arm11/index.php

they can run at 1Ghz no problem but before you set the clock to 1ghz make sure to add heatsink compound, heatsink and fan to it. you have been warned, dont burn your BCS5200 then cry.

Why overclock it tho?

richard_lyew
September 15, 2010, 05:05 PM
Why overclock it tho?

its not overclocking, going over 1ghz would be overclocking.its more like maximum clocking, setting the speed to maximum for maximum performance and better handling of data that's all

richard_lyew
September 16, 2010, 01:59 PM
just saw this post on facebook this morning

http://img185.imageshack.us/img185/6011/digicelslower.th.jpg (http://img185.imageshack.us/i/digicelslower.jpg/)

i taught Digicel said it was 10mb, so how comes now they saying 6mb?

dksurfer
September 16, 2010, 07:32 PM
Nice! You can drop alot of stuff into that... I pulled apart mine bit did not tinker with anything, I just added wires to the antennas to try and extend range.

I would surely warn against any attempted modding of this thing ITS POTENTIALLY DANGEROUS TO THE NETWORK! Messing up the code bits that tells it to interact with the system in a certain manner can damage the sites.

who care's if you modify! you paid for it not freeby.. look at iphones and lots of other devices modify them even on xbox etc... you can get a modchip right so who cares really...

richard_lyew
September 16, 2010, 08:34 PM
who care's if you modify! you paid for it not freeby.. look at iphones and lots of other devices modify them even on xbox etc... you can get a modchip right so who cares really...

yes you paid for it and get a contract with section 5 on it as well. you are legally obligated to stay within the bounds of the contract. or you may be punishable by the full extent of the law.

do you understand what this means? no no wait wait............ do you really understand the contract?

Tyler Durden
September 16, 2010, 10:20 PM
yes you paid for it and get a contract with section 5 on it as well. you are legally obligated to stay within the bounds of the contract. or you may be punishable by the full extent of the law.

do you understand what this means? no no wait wait............ do you really understand the contract?

School dksurfer my yout!

I kinda was wonderin how you know so much bout di digi wimin unit dem...You all know which part a di contract and wah it seh. Bway, you smell like digicel.

:) talk di chrute my yout, yu wrerk fi digi dont it!?

Mi nuh wrong yu. gwane big up yu place! Stan up baka digi!

Digi, Claro, LIME, Flow, DEKAL, whichever one reach mi house first mi tek dem. Although LIME is here now it suck. But at least I am on the net with less then 500k.

richard_lyew
September 16, 2010, 11:59 PM
School dksurfer my yout!

I kinda was wonderin how you know so much bout di digi wimin unit dem...You all know which part a di contract and wah it seh. Bway, you smell like digicel.

:) talk di chrute my yout, yu wrerk fi digi dont it!?

Mi nuh wrong yu. gwane big up yu place! Stan up baka digi!

Digi, Claro, LIME, Flow, DEKAL, whichever one reach mi house first mi tek dem. Although LIME is here now it suck. But at least I am on the net with less then 500k.

hahaaa me work fi Digicel? hahaaaa it tek mi soo long fi get a modem and now mi work fi dem? not because mi post the obvious means mi work fi dem? hahaa because mi know chips and how fi edit firmware means mi work fi digicel? or because mi know bout the contract wea everybody have and can look pan fi demself means mi work fi digicel? hahaaa some people.

Digicel couldn't pay mi

mega man
September 17, 2010, 01:03 AM
hey richard_lyew, you mentioned that your friend had modded the firmware and added stuff to it, does he have a mapping of the sectors, cause i don't want to add anything to mine, i'm more aiming to edit a special string if you know what i mean

richard_lyew
September 17, 2010, 09:43 PM
hey richard_lyew, you mentioned that your friend had modded the firmware and added stuff to it, does he have a mapping of the sectors, cause i don't want to add anything to mine, i'm more aiming to edit a special string if you know what i mean

i have an idea what you mean, like eg.the antenna power output. the transmitters and receivers in these modems are very powerful but because of FCC regulations the companies that manufacture the modems are not allowed to set the transmitters above the FCC standards.

one more thing to keep in mind, did you know that ALL these modems are ONLINE ALL THE TIME? even if you pay or not!!!. but if you dont pay your bill the modem redirect all traffic to digicel's URL. i wonder if someone disable that string, what would happen?

MiniKilla
September 17, 2010, 10:28 PM
These look like edge modem dressed up in 4G Shells

mega man
September 17, 2010, 11:09 PM
i have an idea what you mean, like eg.the antenna power output. the transmitters and receivers in these modems are very powerful but because of FCC regulations the companies that manufacture the modems are not allowed to set the transmitters above the FCC standards.

one more thing to keep in mind, did you know that ALL these modems are ONLINE ALL THE TIME? even if you pay or not!!!. but if you dont pay your bill the modem redirect all traffic to digicel's URL. i wonder if someone disable that string, what would happen?

i was really aiming on editing the antenna for real, back when i use to jtag dishnet recievers i edited the firmware for amplified gain fron the dish as some people had a small 3ft antenna, but know that you mention to me that these babies are online all the time you have me hopping around my room, right now mi brain a tick like a time bomb, ""memba mi tell u, if this feature really works from the modem and not the network mi affi find it!!""

oh and richard, do you know anyone by the name UIN LYEW that use to go to cornwall college in mobay, i had a class mate by that name

richard_lyew
September 18, 2010, 01:43 AM
i was really aiming on editing the antenna for real, back when i use to jtag dishnet recievers i edited the firmware for amplified gain fron the dish as some people had a small 3ft antenna, but know that you mention to me that these babies are online all the time you have me hopping around my room, right now mi brain a tick like a time bomb, ""memba mi tell u, if this feature really works from the modem and not the network mi affi find it!!""

oh and richard, do you know anyone by the name UIN LYEW that use to go to cornwall college in mobay, i had a class mate by that name

no i dont know the person mentioned.

hahaaa i bet ur going crazy right now about the modem being online all the time haahaa if you only know how far mi reach now :eusa_shhh

i have been editing firmware for routers and wifi cards etc for a long time and i did some jtag work on dishnetwork stuff when i used to work for bestbuy in new kingston so i know my way around firmwares.

the result: a modem on crack! LOL with full signal and high speed 24/7

hey Mega Man, watch this in HD http://www.youtube.com/watch?v=PR5HPHqrcZA

rhrh
September 19, 2010, 04:04 PM
richard_lyew:
What is the function of the copper coloured co-ax wire in the left of your Mainboard picture, connected to a small board taped to the inside of the top of the plastic housing? Is that the WiMax antenna? Or do both the 2.4GHz WiFi and the 2.5GHz WiMax signals go through the 2 long antennas at the sides?

richard_lyew
September 19, 2010, 05:27 PM
richard_lyew:
What is the function of the copper coloured co-ax wire in the left of your Mainboard picture, connected to a small board taped to the inside of the top of the plastic housing? Is that the WiMax antenna? Or do both the 2.4GHz WiFi and the 2.5GHz WiMax signals go through the 2 long antennas at the sides?

the whole board is the Wimax modem, there are 2 antennas at the side of the modem with co-ax wires running to then and then there is a wifi USB adapter connected to the modem via a USB connection the modem use this wifi adapter as a wifi router and it has a separate antenna connected to it via a co-ax cable as well, that is the little antenna at the top of the modem. there are 3 antennas in all. 2 for the Wimax modem because its MIMO and one for the wifi.

DaRk-TippER
September 19, 2010, 05:28 PM
ok saw this thread n decided to maybe share something that those who aren't brave enough to crack apart their modems can do. it'll allow u to change everything you'd prolly want to.... 1st up u'll need to open up 192.168.1.1 and login as normal next u hop to http://192.168.1.1/cgi-bin/ u'll c somethin like below....

http://img27.imageshack.us/img27/9573/sss1d.jpg

u'll have to sort thru the clutter of cgi files to find what you want but when u do u'll be able to..... configure ur own voip settings

http://img826.imageshack.us/img826/7499/sss2g.jpg

enable dynamic dns.....

http://img191.imageshack.us/img191/8172/sss3n.png

or quite simply b totally rid of digicel by using the official firmware 4 d device

http://www.zyxel.com/web/support_download_result.php

http://img267.imageshack.us/img267/2108/sss4b.jpg

.... the original device uses the same firmware as the MAX-207HW2R from ZyXEL so it shud wrk pretty well.... unfortunately i cant try it as the modem isn't mine.... but tinker around & u guys mite find some more cool stuff... o & sorry abt the longish post...

Scoundrel
September 19, 2010, 05:35 PM
ok saw this thread n decided to maybe share something that those who aren't brave enough to crack apart their modems can do. it'll allow u to change everything you'd prolly want to.... 1st up u'll need to open up 192.168.1.1 and login as normal next u hop to http://192.168.1.1/cgi-bin/ u'll c somethin like below....

http://img27.imageshack.us/img27/9573/sss1d.jpg

u'll have to sort thru the clutter of cgi files to find what you want but when u do u'll be able to..... configure ur own voip settings

http://img826.imageshack.us/img826/7499/sss2g.jpg

enable dynamic dns.....

http://img191.imageshack.us/img191/8172/sss3n.png

or quite simply b totally rid of digicel by using the official firmware 4 d device

http://www.zyxel.com/web/support_download_result.php

http://img267.imageshack.us/img267/2108/sss4b.jpg

.... the original device uses the same firmware as the MAX-216HW2 from ZyXEL so it shud wrk pretty well.... unfortunately i cant try it as the modem isn't mine.... but tinker around & u guys mite find some more cool stuff... o & sorry abt the longish post...

So basically you putting on a different firmware, but what you suspect it will achieve or how you tink the network would react to this device wid a different firmware?

DaRk-TippER
September 19, 2010, 05:48 PM
i never put on a different firmware... wat i demonstrated was using the same firmware on d devices.... i went a bit further by sayin those who want to put on a 'different' firmware can.... the firmware that ships wit the original devices (w/o the digi branding) is the same as that found on the MAX-207HW2R(so says the FCC @ least)

rhrh
September 19, 2010, 07:38 PM
the whole board is the Wimax modem, there are 2 antennas at the side of the modem with co-ax wires running to then and then there is a wifi USB adapter connected to the modem via a USB connection the modem use this wifi adapter as a wifi router and it has a separate antenna connected to it via a co-ax cable as well, that is the little antenna at the top of the modem. there are 3 antennas in all. 2 for the Wimax modem because its MIMO and one for the wifi.

Thanks for the reply, but I'm sorry - I'm not sure what you mean.

Do you mean that (1) the WiMax 2.5Ghz transmit and receive signals both go through the small antenna in the top of the device, and that the 2.4GHz signal for the local 802.11 WiFi router goes through the two 9" long antennas at the side, one receiving and one transmitting? (I.e. the main/large board is the WIFI router, with 2 antennas, and the smaller subsidiary board screwed on top of it is the "USB WiMax adapter modem" you refer to, with a SINGLE, FLAT antenna at the top)

Or (2) it is the other way around, i.e. with the WiMax signal going through the 9" antennas and the Wifi signal going through the single small flat antenna in the top?

Since the common wireless routers use similar 9" antennas I had assumed that #1 was correct, and that those were for the WiFi router's signal. In the past I have attached an external yagi-type directional antenna in place of one of the 2 "rubber duck" antennas on the back of a Linksys router and gotten 1 mile range from it (2-way communication), and had the remaining rubber duck antenna provide local omni-directional WiFi coverage. So I still think the two 9" antennas are for WiFi use, and that BOTH can receive or transmit independently. Am I wrong?

My concern is where to attach a higher gain antenna (to get a signal from an obstructed Digicel tower): in place of a 9" antenna, or in place of the small flat one. I had thought i just needed to connect it in place of the single flat antenna on top. If #2 is correct then I would need 2 external directional antennas: 1 to to handle the Wimax signal being transmitted to the cell tower and a second to handle the signal received from the tower.

potoguise1
September 19, 2010, 08:01 PM
i was really aiming on editing the antenna for real, back when i use to jtag dishnet recievers i edited the firmware for amplified gain fron the dish as some people had a small 3ft antenna, but know that you mention to me that these babies are online all the time you have me hopping around my room, right now mi brain a tick like a time bomb, ""memba mi tell u, if this feature really works from the modem and not the network mi affi find it!!""

oh and richard, do you know anyone by the name UIN LYEW that use to go to cornwall college in mobay, i had a class mate by that name


were you able to amplify the signal gain on those DVB boxes in any significant way? I used to edit tsop and eeprom but just to allowed the boxes to bypass those nagging ecm's.

wasp
September 19, 2010, 10:48 PM
seems interesting!!! well theirs a saying: give unto Caesar what is due to caeser, I got 1 of my own if caeser deprives me then what sud i do about Caesars portion......lmfao

richard_lyew
September 20, 2010, 12:57 AM
So basically you putting on a different firmware, but what you suspect it will achieve or how you tink the network would react to this device wid a different firmware?

i didn't go through all this, i just enable telnet and edit through that

Scoundrel
September 20, 2010, 01:03 AM
i didn't go through all this, i just enable telnet and edit through that

So what you getting now, still in the 1megs? How much fluctuating?

richard_lyew
September 20, 2010, 01:19 AM
So what you getting now, still in the 1megs? How much fluctuating?

in the nights i can get 1mb downloads but int he day only 500 to 800kb. but today was fast thou

remember to take a look at this http://192.168.1.1/cgi-bin/oma.cgi forum do you think more than one modem can use the same login? and yes you can use the original firmware just save all your config files and replace them when you update the firmware. dont be scared LOL its like saving all your contacts off ur cellphone then update the firmware and restore the contacts. very simple

mega man
September 20, 2010, 01:45 AM
were you able to amplify the signal gain on those DVB boxes in any significant way? I used to edit tsop and eeprom but just to allowed the boxes to bypass those nagging ecm's.

yes i did, the only boxes that gave not such high signals wher the coverted ones, eg. dp301(dish card receiver) hughes gaebo(dtv reciever) and the rca cyclops(dtv receiver), this was because the tuners in these boxes where a bit different being as they had to be concverted from dss to dvb, but all other fta boxes like pansat, coolsat and a few others seemed to work nicely, and they still work sweet with fta set up

Scoundrel
September 20, 2010, 01:59 AM
in the nights i can get 1mb downloads but int he day only 500 to 800kb. but today was fast thou

remember to take a look at this http://192.168.1.1/cgi-bin/oma.cgi forum do you think more than one modem can use the same login? and yes you can use the original firmware just save all your config files and replace them when you update the firmware. dont be scared LOL its like saving all your contacts off ur cellphone then update the firmware and restore the contacts. very simple

That link have issues tho

richard_lyew
September 20, 2010, 02:01 AM
Thanks for the reply, but I'm sorry - I'm not sure what you mean.

Do you mean that (1) the WiMax 2.5Ghz transmit and receive signals both go through the small antenna in the top of the device, and that the 2.4GHz signal for the local 802.11 WiFi router goes through the two 9" long antennas at the side, one receiving and one transmitting? (I.e. the main/large board is the WIFI router, with 2 antennas, and the smaller subsidiary board screwed on top of it is the "USB WiMax adapter modem" you refer to, with a SINGLE, FLAT antenna at the top)

clipped for brevity

http://www.zyxel.es/ZyPartner10/po_wimax_2010_000070b_100126.pdf


That link have issues tho

its in use thats why u cant change it. u cando 2 things. 1 copy it to your computer and edit then overwrite it or start your modem in safe mode then edit it and save it without coping it to ur computer first

Scoundrel
September 20, 2010, 02:19 AM
its in use thats why u cant change it. u cando 2 things. 1 copy it to your computer and edit then overwrite it or start your modem in safe mode then edit it and save it without coping it to ur computer first

Hmmm....you lost me at blah blah blah! Lol. I don't hav it yet, thank god, but its good to hav all this inside info for when i need it

richard_lyew
September 20, 2010, 02:21 AM
also u need both files and the oma_apply.cgi file you will have to get from the original firmware because the one on the Digicel modem dont work because they dont want u to disable the OMA

Scoundrel
September 20, 2010, 02:36 AM
also u need both files and the oma_apply.cgi file you will have to get from the original firmware because the one on the Digicel modem dont work because they dont want u to disable the OMA

Did you think bout tryin any kinda modem tweakin software 1st?

richard_lyew
September 20, 2010, 02:47 AM
Did you think bout tryin any kinda modem tweakin software 1st?

yep but the original firmware is way easier to work with

i use this program to save my files off the modem
http://img831.imageshack.us/img831/3190/digicelmodemfiles.th.jpg (http://img831.imageshack.us/i/digicelmodemfiles.jpg/)

evastrapkoremadhead
September 20, 2010, 03:11 AM
also u need both files and the oma_apply.cgi file you will have to get from the original firmware because the one on the Digicel modem dont work because they dont want u to disable the OMA


even if i did get the files of the modem what exactly would i edit :(
i`m not to familiar with these modems at all so at this point i`m just going through changing stuff as i go and hoping to see a change

Samwells
September 20, 2010, 07:59 AM
I hope you guys realise that their are a number of Digi workers on this site.

Scoundrel
September 20, 2010, 11:14 AM
I hope you guys realise that their are a number of Digi workers on this site.

Hope them realise that its because of nature of the network why people have resorted to modding their modems

richard_lyew
September 20, 2010, 12:25 PM
I hope you guys realise that their are a number of Digi workers on this site.

yep i told the forum that the network workers watch this forum especially this thread like a hawk! i told them. that's why i don't mess around with their equipment. and thats why i dont post my serial number, service id, mac etc.....


Hope them realise that its because of nature of the network why people have resorted to modding their modems

i don't mod nothing, i don't know nothing :eusa_ange i only pass on free information. it goes against the contract to alter Digicel's equipment/devices

evastrapkoremadhead
September 20, 2010, 01:23 PM
i don't mod nothing, i don't know nothing :eusa_ange i only pass on free information. it goes against the contract to alter Digicel's equipment/devices

lol as if i`d be stupid enough to post info about modding on here
i dont mod anything i only mess with settings that are already there in tha modems firmware no hardware/software modding involved :eusa_naug

mega man
September 20, 2010, 11:32 PM
hahaha, listen to you people scared as hell of digi spies, well let me tell everyone reading this forum, i believe that everything can be reversed engineered and made to work better, if i have something and i figure out a way to mod alter or hack whatever you call it then i'll do it, but thats when it works better to my suit, while in this proccess if your system has a loop-hole where i end up getting your service free then too bad for you, thats your security flaw.

hacking, modding or altering of software/hardware is only deemed illegal(if your caught) when your actions cause harm or offence to the organisation or owner of the device or program, where the piont or method of access is un-authorized.

(on the basis where people share info here) If however information is shared via the freedom of knowledge, the person sharing the information cannot be held responsible for educational actions as your means or doings has nothing to do with the teacher who shared his/her's knowledge.

so digi can guweh, if the ol wi-min did a work good no one would have been modding it from first, well maybe a few still:eusa_whis but the point still remains it naaa work good and people want it to work better

lorettagbr
September 21, 2010, 01:44 AM
hahaha, listen to you people scared as hell of digi spies, well let me tell everyone reading this forum, i believe that everything can be reversed engineered and made to work better, if i have something and i figure out a way to mod alter or hack whatever you call it then i'll do it, but thats when it works better to my suit, while in this proccess if your system has a loop-hole where i end up getting your service free then too bad for you, thats your security flaw.

hacking, modding or altering of software/hardware is only deemed illegal(if your caught) when your actions cause harm or offence to the organisation or owner of the device or program, where the piont or method of access is un-authorized.

(on the basis where people share info here) If however information is shared via the freedom of knowledge, the person sharing the information cannot be held responsible for educational actions as your means or doings has nothing to do with the teacher who shared his/her's knowledge.

so digi can guweh, if the ol wi-min did a work good no one would have been modding it from first, well maybe a few still:eusa_whis but the point still remains it naaa work good and people want it to work better

good post mega man :eusa_clap:eusa_clap:eusa_clap you remind me of some one on (Dss Rookie) he was also very knowledgeable it wouldn't be you would it?

richard_lyew
September 21, 2010, 02:58 AM
hahaha, listen to you people scared as hell of digi spies, well let me tell everyone reading this forum, i believe that everything can be reversed engineered and made to work better, if i have something and i figure out a way to mod alter or hack whatever you call it then i'll do it, but thats when it works better to my suit, while in this proccess if your system has a loop-hole where i end up getting your service free then too bad for you, thats your security flaw.

hacking, modding or altering of software/hardware is only deemed illegal(if your caught) when your actions cause harm or offence to the organisation or owner of the device or program, where the piont or method of access is un-authorized.

(on the basis where people share info here) If however information is shared via the freedom of knowledge, the person sharing the information cannot be held responsible for educational actions as your means or doings has nothing to do with the teacher who shared his/her's knowledge.

so digi can guweh, if the ol wi-min did a work good no one would have been modding it from first, well maybe a few still:eusa_whis but the point still remains it naaa work good and people want it to work better

hahaaa i know what you mean, if its not broken don't fix it. right?
from people hear sey this thread turn Digicel's 4G department's homepage, everybody stop post and start send pm hahaaaaa. well a mi mek di thread and share the most info su uno dont have to be scared of Digicel locking u up hahaaa if anything a me dem woulda come offa.

btw anybody need anymore files just pm me if yu scared fi ask on the thread LMAO

evastrapkoremadhead
September 21, 2010, 04:31 AM
hahaaa i know what you mean, if its not broken don't fix it. right?
from people hear sey this thread turn Digicel's 4G department's homepage, everybody stop post and start send pm hahaaaaa. well a mi mek di thread and share the most info su uno dont have to be scared of Digicel locking u up hahaaa if anything a me dem woulda come offa.

btw anybody need anymore files just pm me if yu scared fi ask on the thread LMAO

lol dem man ya no want digi lock dem up lol...
i dont mod anything in case your wondering :eusa_liar:eusa_liar
lol dwl

Scoundrel
September 21, 2010, 05:49 AM
Any1 by chance had any experience using the green packet modem, you know, its latest 1 digi was offering. Needing some info on how it was reacting on the network, stability issues and such. And it can accommodate an external antenna right? Think i heard that. Just figure this would be a better CPE than the wifi modem (well certainly it should have more potential if you know what i mean, lol).

richard_lyew
September 21, 2010, 10:59 AM
Any1 by chance had any experience using the green packet modem, you know, its latest 1 digi was offering. Needing some info on how it was reacting on the network, stability issues and such. And it can accommodate an external antenna right? Think i heard that. Just figure this would be a better CPE than the wifi modem (well certainly it should have more potential if you know what i mean, lol).

hahaaa "potential" hahaa jus sey yu wa mod it man, wi all know wea yu a think. im going to ask a friend to buy one for me this week and test it out to see how much "potential" it has hahaaaa.

richard_lyew
September 21, 2010, 12:40 PM
wow did the speed just jump for everybody or just me? torrents 1.5mb down and 100kb up and im downloading from youtube at the same time getting 600kb down

Scoundrel
September 21, 2010, 01:14 PM
hahaaa "potential" hahaa jus sey yu wa mod it man, wi all know wea yu a think. im going to ask a friend to buy one for me this week and test it out to see how much "potential" it has hahaaaa.

DWL, ok boss. All i'm sayin is i think it'd probably get the job done better

richard_lyew
September 21, 2010, 01:53 PM
DWL, ok boss. All i'm sayin is i think it'd probably get the job done better

i don't know but the MAX-207HW2 is pretty good plus its 12vdc so you can take it in your car with you. and it has way better amplification "potentials" LOL.

hey i need feed back, did anybody speed went up today or just me?

kalel17
September 21, 2010, 02:41 PM
mine tripled from 0.5/0.6 to 1.8mbps

wasp
September 21, 2010, 02:56 PM
Can anyone verify this info

Your modem is a cellular, wireless modem [ green packet ex 250 modem]. That means that it's almost certainly behind a firewalled wireless router which you cannot control. You will not be able to open a listen port on that router, so must use "no listen port" mode. This means your connection will not ever be as fast as it might be, but there's nothing that you can do about it on this type of connection.

This is one of the big disadvantages of nearly every type of wireless connection.

For exactly the same reason, you cannot run a public server such as a web server, on your connection. No unsolicited incoming traffic is allowed through the firewall, so nobody but people already on your side of the firewall already, could ever connect to you.

When choosing an internet connection, you should keep this fact in mind.

Scoundrel
September 21, 2010, 06:59 PM
mine tripled from 0.5/0.6 to 1.8mbps

I gonna hav to ask the obvious, is that you getting with torrenting? Cause i don't think is speedtest results you talking of no? **Snap out of it back to earth**

richard_lyew
September 21, 2010, 07:08 PM
I gonna hav to ask the obvious, is that you getting with torrenting? Cause i don't think is speedtest results you talking of no? **Snap out of it back to earth**

ok it drop back now. i was getting 1.5mb from torrent now only 700kb

Scoundrel
September 21, 2010, 07:30 PM
ok it drop back now. i was getting 1.5mb from torrent now only 700kb

To breadfruit! Lol, but you nu count still (LMAO), that round good still. What sorta data you think you averaging daily? Have 2 1Tb drives thats dying for some action...lol. I did the math for a 6gig torrent at what kalel mention and by fone froze! DWL

richard_lyew
September 21, 2010, 07:45 PM
To breadfruit! Lol, but you nu count still (LMAO), that round good still. What sorta data you think you averaging daily? Have 2 1Tb drives thats dying for some action...lol. I did the math for a 6gig torrent at what kalel mention and by fone froze! DWL

im not sure how much i can get a day and i cant really base it all on torrents because sometimes you might have a low source torrent in your list but overall data download a day it about 30gb to 40gb. i have a total storage of 8TB out of that only little over 2TB is free.

i found something strange today. when i was getting fast speed i open 3 torrent client at the same time and gave them their own port, and all of them was getting the same speed :eusa_eh: it didnt drop they were all getting about 1.2mb each :eusa_eh: i think Digicel is trying to cap how much each port is getting but you can open as much ports as you want.

dtgo
September 21, 2010, 07:54 PM
i know what you mean. like for eg. if someone (NOT Me :eusa_ange ) should edit their firmware and disable the OAM(Over-The-Air Mobile Device Management) feature and manage their device themselves. that would be bad for the network because they wouldn't have control over that device anymore.
http://www.smithmicro.com/products/device-management-suite.aspx

i love this post... ima get working :icon_roll

kalel17
September 21, 2010, 08:04 PM
I gonna hav to ask the obvious, is that you getting with torrenting? Cause i don't think is speedtest results you talking of no? **Snap out of it back to earth**

Nope still getting 20KB/s and less with torrent

Scoundrel
September 21, 2010, 08:10 PM
ok it drop back now. i was getting 1.5mb from torrent now only 700kb


Nope still getting 20KB/s and less with torrent

Dunno how long i could keep ur kinda faith, i would have gone off on a tangent a long time ago. So your speed test says 1meg+? Maybe you can give richard a roast yeah! Lol

jamerican
September 21, 2010, 08:21 PM
all that is needed to is a jtag cable and proper software to retrieve config files and rewrite them. if you look at this picture i have highlighted the pins http://img517.imageshack.us/img517/3516/dscf3772w.jpg now go do your own research.

richard_lyew
September 21, 2010, 08:50 PM
i love this post... ima get working :icon_roll

yea and the address for the file is http://192.168.1.1/cgi-bin/oma.cgi but i dont think u can replace or change it while its in use, you will have to start the modem in a mode that will allow you to work on it. eg. short pins 17 and 18 on the flash chip them power on the modem, then ping 192.168.1.1, login copy what u want to change and overwrite it.

hey everybody remember when go through telnet, make sure you are 33 or else you wont logon. i will post a video on that soon

traze2k4
September 21, 2010, 08:53 PM
oh boy. its TSOP48. i post all the info and you still wondering bout the little things?
http://ae.rsdelivers.com/product/hynix/hy27us08121b-tpcb/flash-nand-512mb-x8-tsop-small-blk-3v/6686161.aspx

Jus wondering (since i dont have one myself), aren't there any terms of use or contracts involved with acquiring these modems? i've been meaning to inquire about that but haven't gotten the chance to. if none are involved then maybe what "some ppl" are doing out there may not be legally fine-able unless the network sites themselves are exploited...but i'm no lawyer so....jus hypothetic reasoning(disclaims anything legally questionable said above)

richard_lyew
September 21, 2010, 09:01 PM
all that is needed to is a jtag cable and proper software to retrieve config files and rewrite them. if you look at this picture i have highlighted the pins http://img517.imageshack.us/img517/3516/dscf3772w.jpg now go do your own research.

you sure those are the jtag ports? :eusa_thin and you can make your own jtag cable, all you need is a parallel port cable and four 100oms resisters. as for the software, there are tons out there. ill post a link soon

jamerican
September 21, 2010, 09:07 PM
parallel port cable takes too long, USB Jtag best thing since slice bread

Scoundrel
September 21, 2010, 09:14 PM
parallel port cable takes too long, USB Jtag best thing since slice bread

And what kinda results you gettin

jamerican
September 21, 2010, 09:21 PM
And what kinda results you gettin

I didnt say i was doing anything to get results, but im a 100% sure it can be done.. its same process as moding or debricking a cable modem or router.

richard_lyew
September 21, 2010, 09:22 PM
Jus wondering (since i dont have one myself), aren't there any terms of use or contracts involved with acquiring these modems? i've been meaning to inquire about that but haven't gotten the chance to. if none are involved then maybe what "some ppl" are doing out there may not be legally fine-able unless the network sites themselves are exploited...but i'm no lawyer so....jus hypothetic reasoning(disclaims anything legally questionable said above)

EVERY modem comes with a contract and on that contract you will see a section 5

http://img259.imageshack.us/img259/2253/dscf3757.th.jpg (http://img259.imageshack.us/i/dscf3757.jpg/)


parallel port cable takes too long, USB Jtag best thing since slice bread

yea but you cant make a usb jtag cable. it only take 5mins to make a parallel cable

jamerican
September 21, 2010, 09:44 PM
yea but you cant make a usb jtag cable. it only take 5mins to make a parallel cable

well here is my USB and Parallel Jtag http://img213.imageshack.us/img213/5034/photoxm.jpg

venomhotboy
September 21, 2010, 10:39 PM
I want the firmware... can someone send the firmware to me? The unbranding one.. Thanks. :)

richard_lyew
September 21, 2010, 10:40 PM
im planning on getting this http://www.letstalk.com/htc-evo-4g-sprint i wonder if i can share my Digicel 4G settings with it


I want the firmware... can someone send the firmware to me? The unbranding one.. Thanks. :)

pm me ur email and ill send you the firmware

mega man
September 22, 2010, 02:06 AM
good post mega man :eusa_clap:eusa_clap:eusa_clap you remind me of some one on (Dss Rookie) he was also very knowledgeable it wouldn't be you would it?

LOL.:D the same megaman from dss rookie, hashhu, abadss, cc, ftabins, dsscentral, who use to write atmega bin files at dss milli, i could go on naming but you get the piont, still here messing with anything that i find interesting.:icon_lol:

richard_lyew
September 22, 2010, 03:17 PM
i just order a USB JTAG NT from http://www.usbjtag.com/ cant wait to get it. reading and writing will be a blast.

zerodeth
September 22, 2010, 03:33 PM
im planning on getting this http://www.letstalk.com/htc-evo-4g-sprint i wonder if i can share my Digicel 4G settings with it

according to Wiki Digicel has deployed an 802.16d network.

and the evo uses 802.16e

http://www.wimax.com/wimax-technologies-standards/what-is-ieee-80216d

richard_lyew
September 22, 2010, 04:09 PM
according to Wiki Digicel has deployed an 802.16d network.

and the evo uses 802.16e

http://www.wimax.com/wimax-technologies-standards/what-is-ieee-80216d

damit! ill change that order then. wow big speed boost just now. im getting 1.8mb from torrents(5 files at the same time) and 900kb from websites. my time is 4:08pm. the speed boost started about 10mins ago

kalel17
September 22, 2010, 04:36 PM
according to Wiki Digicel has deployed an 802.16d network.

and the evo uses 802.16e

http://www.wimax.com/wimax-technologies-standards/what-is-ieee-80216d

No No, the current consumer wimax version digi has is 802.16e, the 802.16d is from their older corporate version that is being used by corporate only.

richard_lyew
September 22, 2010, 05:34 PM
No No, the current consumer wimax version digi has is 802.16e, the 802.16d is from their older corporate version that is being used by corporate only.

ok im not going to cancel the order then. btw anybody getting good speed now? because my speed is faster now

kalel17
September 22, 2010, 07:02 PM
ok im not going to cancel the order then. btw anybody getting good speed now? because my speed is faster now

I am getting 100kb/s+ using torrent... better than the 4kb/s am used to

Cultus
September 23, 2010, 02:26 AM
WOW, now you little techno geeks have just fueled the desires of a disgruntled Digicel subscriber to cause network problems. Sometimes somethings are better left unsaid. Either ways knowing is bad and ignorance to the fact is also bad.
From a tech perspective this is an excellent thread ;) I was always curious as to the makeup of this wonderful device.

richard_lyew
September 23, 2010, 02:31 AM
for those who ask about the pictures or images. too easy, they are here http://192.168.1.1/images/

again i warn, people please dont mod these pics to make the modem display your picture or whatever picture you want it to. please do NOT in anyway alter any Digicel equipments/devices. you have been warned

Thank you

gbird
September 23, 2010, 09:42 AM
damit! ill change that order then. wow big speed boost just now. im getting 1.8mb from torrents(5 files at the same time) and 900kb from websites. my time is 4:08pm. the speed boost started about 10mins ago

Where are you located, how you getting those speeds and i have 3 full bars and most sites come up half rendered.

richard_lyew
September 23, 2010, 11:31 AM
http://en.wikipedia.org/wiki/Public_key_fingerprint
http://192.168.1.1/cgi-bin/certificates_edit.cgi

ftp://opensource.zyxel.com/
http://www.youtube.com/watch?v=q1udzxOt4CM

kalel17
September 23, 2010, 11:32 AM
And I am now getting download speeds like this:

http://img178.imageshack.us/img178/7020/screenshot3p.png (http://img178.imageshack.us/i/screenshot3p.png/)

Uploaded with ImageShack.us (http://imageshack.us)

The irony is that I was cussing claro's 3g speed which ran at 34-45KB/s, now I dont know what to say about this . All this with 2 bars.

I also have ALOT of problems downloading torrent files, they either end up corrupted or just sit there downloading at 230b/s(Bytes per second)

RadForce68
September 23, 2010, 11:43 AM
Come weekend a carrying back this Digicel Modem, it's the MOST UNSTABLE thing i ever come across, one minute a getting 5 and 6, couple minutes after a getting 1.5 and 2.

Look like richard_lyew work a Digicel. Going to Flow and get my free router. This Digicel 4G thing is a waste of @$%^*(&(^&%$#@ money. I wouldn't advice my enemy to get it.

Word-a-mouth stronger than them ads on TV, if dem no fix it fast, they will lose BIG on this thing.

Scoundrel
September 23, 2010, 12:25 PM
I borrowed my cousin's Claro 3g modem, pulled up speedtest.net and ran the test to register the kingston server. Plugged out the Claro 3g modem then plugged in the WiMAX modem and ran the test again on the same page "Test Again". The results

http://www.speedtest.net/result/964612075.png (http://www.speedtest.net)

vs

Digicel stand alone test, NC server
http://www.speedtest.net/result/964618669.png (http://www.speedtest.net)

And i did see it in a fourth thread! Grrrr!

richard_lyew
September 23, 2010, 02:17 PM
wow i hear a bunch of people just fell off hahaaa is that what ur paying for? hahaaa poor souls. time is now 2:16pm

Scoundrel
September 23, 2010, 02:26 PM
wow i hear a bunch of people just fell off hahaaa is that what ur paying for? hahaaa poor souls. time is now 2:16pm

What you mean fell off?

richard_lyew
September 23, 2010, 04:24 PM
no connection. lost signal.

just edit the post. everybody signal is back and everybody have ip address now in Jamaica, no longer in the USA.

ginegog
September 23, 2010, 05:33 PM
no connection. lost signal.

just edit the post. everybody signal is back and everybody have ip address now in Jamaica, no longer in the USA.

No longer coming up in the US? ^@%^#& :icon_frow
How is the speed?

kalel17
September 23, 2010, 05:59 PM
no connection. lost signal.

just edit the post. everybody signal is back and everybody have ip address now in Jamaica, no longer in the USA.

Yea my net went down for 3hrs.. Right when I was finishing up work it went down so my boss had to finish up for me :( .

Speed is the same.

I did use the free time to finish up the review though :) , will be up Oct 1

richard_lyew
September 25, 2010, 12:02 PM
Yea my net went down for 3hrs.. Right when I was finishing up work it went down so my boss had to finish up for me :( .

Speed is the same.

I did use the free time to finish up the review though :) , will be up Oct 1

i will be sure to look out for it

Eynestyne
September 28, 2010, 02:01 PM
Check out the Black version from Taiwan:http://lh3.ggpht.com/_iSEk3XlUeJw/THO1UAyD-QI/AAAAAAAAKHI/ev382qacalI/g1p2_04.jpg

I think it looks cooler than the red and white.

wasp
September 28, 2010, 02:42 PM
Check out the Black version from Taiwan:http://lh3.ggpht.com/_iSEk3XlUeJw/THO1UAyD-QI/AAAAAAAAKHI/ev382qacalI/g1p2_04.jpg

I think it looks cooler than the red and white.

The DOG on the modem tell the tales :eusa_booh:eusa_pray:eusa_wall the thing is already sleeping and wont wake up :eusa_snoo

richard_lyew
September 29, 2010, 02:57 AM
yea thats the same one i post in the pdf link. @Wasp, relax the people dem a work pan it. by today u will see a likkle betta speed

mega man
September 29, 2010, 08:06 PM
JAH know iyah every time mi here that them working on the system mi fret star, nexting dem touch someting and compromise mi freeness iyah

richard_lyew
September 29, 2010, 09:59 PM
JAH know iyah every time mi here that them working on the system mi fret star, nexting dem touch someting and compromise mi freeness iyah

hahaaaa yu OAM off? if so, yu nu have nothing fi worry bout :D

wow mi have fi edit this post. my torrent speed is at the highest i have seen so far. my time now 12:40am

jamtech
September 30, 2010, 07:06 AM
yea thats the same one i post in the pdf link. @Wasp, relax the people dem a work pan it. by today u will see a likkle betta speed

Work pon system inna flood?....yu too r@ss lie.

digimon
September 30, 2010, 08:57 AM
LOL.:D the same megaman from dss rookie, hashhu, abadss, cc, ftabins, dsscentral, who use to write atmega bin files at dss milli, i could go on naming but you get the piont, still here messing with anything that i find interesting.:icon_lol:

Yuh waant go a jail? Edit the Post my yute. I nah mek u go jail fi dat!

wasp
September 30, 2010, 09:05 AM
I can now c the lazy bums in the digicel 4g department laughing of their asses due 2 the weather they av sum more time to stall fixing the damn netwok.

Jamaicans Jamaica = a bunch of Jamaicants
We get wat we truly deserve lmao

Eynestyne
September 30, 2010, 06:12 PM
ok saw this thread n decided to maybe share something that those who aren't brave enough to crack apart their modems can do. it'll allow u to change everything you'd prolly want to.... 1st up u'll need to open up 192.168.1.1 and login as normal next u hop to http://192.168.1.1/cgi-bin/ u'll c somethin like below....

http://img27.imageshack.us/img27/9573/sss1d.jpg

clipped for brevity

nice, very nice, was wondering were all the other options were.
I already bore two hole it in so!! :eusa_whis :icon_evil

kalel17
September 30, 2010, 07:22 PM
The DOG on the modem tell the tales :eusa_booh:eusa_pray:eusa_wall the thing is already sleeping and wont wake up :eusa_snoofor them sleeping is 6mbps - 10mbps

comptech
September 30, 2010, 08:06 PM
the other day d credit ran out so i was at work topped up and tried to log in to self care from my lan network i couldnt until i got on to a 192 network so if u modem down or watever u can do no selfcare until u on there network

richard_lyew
October 1, 2010, 05:07 PM
jah know star Digicel need fi du something bout the people dem dea pay fi 1 month and only have a likkle internet fi 2 weeks outa the month wea dem pay fa. it done slow already and now people a miss days, poor souls.

capybara
October 1, 2010, 06:15 PM
Modification of Modem Technology is punishable by prosecution (and persecution), specifically if the modification is for the purpose of illegal access of other network i.e. unregistered and unauthenticated access.

Please note this is IEEE (Institute of Electrical and Electronics Engineers) [http://www.ieee.org/index.html ] technology, not a mobile phone using CDMA (Code Division Multiple Access) or GSM (Global System Mobile). You are NOT supposed to buy any generic modem and place it on a Telecom Providers network without prior registration. any such via modification of modem, which is where i notice this thread seems to be heading, constitutes a breach of the End User Agreement and can be punishable via fines and imprisonment, as this is tantamount to hacking a network.

Please refrain or do not even contemplate this activity as it is CLEARLY written on your Digicel End User Agreement as being illegal and a violation of your contract

Note that Telecom Provider LIME and Telecom Provider Claro cap their data 3G plans and all users are registered with Government of Jamaica Identification.

Telecom Provider Digicel also registers with Government of Jamaica Identification and reserves the right to make changes to it conditions of access , inclusive of throttling and block downloading via various "means" that is considered a breach of its Digicel End User Agreement. Digicel 4G Mobile (IEEE 802.16d) Broadband service is throttled to prevent unauthorized usage i.e. hacking and downloading of copyright material as this exposes the company to litigation by Content Provider both locally and internationally. Remember, your actions will result in your losing you network privileges PERMANENTLY.

Digicel cannot "cap" in the traditional sense and drop speed to EDGE (Enhance Data Rates for GSM Evolution) as that is a GSMA ramified 3GPP protocol. Throttleing is their only solution..........for now, until better strategies are developed to control peoples behavior on networks.

I take PERSONAL umbrage with people who mess with IEEE Open Architecture Technology, as it implies people have no respect of the sharing and community that the IEEE allows engineers to share technical standards license free to members who form alliances to push through hardware and software technical standard.

Please, desist from modification and Embrace the Light of Open Architecture that membership of the IEEE affords.

wasp
October 1, 2010, 07:23 PM
Modification of Modem Technology is punishable by prosecution (and persecution), specifically if the modification is for the purpose of illegal access of other network i.e. unregistered and unauthenticated access.

Please note this is IEEE (Institute of Electrical and Electronics Engineers) [http://www.ieee.org/index.html ] technology, not a mobile phone using CDMA (Code Division Multiple Access) or GSM (Global System Mobile). You are NOT supposed to buy any generic modem and place it on a Telecom Providers network without prior registration. any such via modification of modem, which is where i notice this thread seems to be heading, constitutes a breach of the End User Agreement and can be punishable via fines and imprisonment, as this is tantamount to hacking a network.

clipped for brevity

mhm :eusa_booh haha:icon_roll lol:icon_lol: well well lets c nuh

capybara
October 1, 2010, 08:55 PM
mhm :eusa_booh haha:icon_roll lol:icon_lol: well well lets c nuh

That is correct.

Anyone post anymore links to this thread with regards to modem modification, and i will have Techjamaica Shut Down. This is a MY WARNING!!!!!!

I hope this is clear to you all, I have served warning to your so-called Moderators and Administrators. If he fails to comply, i will have his house raided and Techjamaica shut down COMPLETELY.


We will not have hooligans modifying our modems tech. if you want to learn about Modem tech, join the IEEE and cease and desist modem modification. I am horrified that young people are engaged in this type of activity within our territorial waters. If you have a valid complaint against a Telecom Provider, either you write a letter of complain of your evidence to your respective Telecom Provider!!!!

Arch_Angel
October 1, 2010, 09:06 PM
I hope this is clear to you all, I have served warning to your so-called Moderators and Administrators. If he fails to comply, i will have his house raided and Techjamaica shut down COMPLETELY. :icon_eek: Oh SNAP!!!

*grabs suitcase, stuff some clothes in it and run out di door*

:icon_frow

jamtech
October 1, 2010, 09:17 PM
Guh whey Capybara/Cabarya/Calabash or wha yu name..........yu piece of hot mess, just like digi........guh jump off a flat bridge.


And one next ting Capybar, nuff post no more a yu idiot link on here..........wi nuh want fi read yu trash, keep yu thoughts to yuself. Lol....Ah wonder if techja coulda really mek a idiot like yu threaten them.......mek mi was a mod......mi wouldn't ban yu, but when a done tell yu mi mind, yu wish yu never born........di site owner woulda ban mi too.......


****When mi did a tell unnu seh digicel send nuff a dem pon here come spy and spread propoganda, unnu neva beleive mi, seet deh now, si one a di idiat whey dem send too.......yu si how nuff a dem can register when digi roll out something and when a next company a turn up di heat pon dem.******

lorettagbr
October 1, 2010, 09:18 PM
That is correct.

Anyone post anymore links to this thread with regards to modem modification, and i will have Techjamaica Shut Down. This is a MY WARNING!!!!!!

I hope this is clear to you all, I have served warning to your so-called Moderators and Administrators. If he fails to comply, i will have his house raided and Techjamaica shut down COMPLETELY.


We will not have hooligans modifying our modems tech. if you want to learn about Modem tech, join the IEEE and cease and desist modem modification. I am horrified that young people are engaged in this type of activity within our territorial waters. If you have a valid complaint against a Telecom Provider, either you write a letter of complain of your evidence to your respective Telecom Provider!!!!

you have scared the sheet out of me i am hiding under my bed while typing this i am shaking like virgin on her wedding night ,look pal these information you can get any where on the net ,now will you crawl back under the rock from which you came ,i may also remind you that cyberbullying is also a crime ,so your attempt at bullying techjamaica's members is in effect a crime ,so if you have a problem with freely available information from any where else on the net being posted here take it up with the relevant persons,but until then you can go have sex and then travel on a very long journey

g2cris
October 1, 2010, 09:53 PM
That is correct.

Anyone post anymore links to this thread with regards to modem modification, and i will have Techjamaica Shut Down. This is a MY WARNING!!!!!!

CLOWN!!!!!!!!!!!!!!!!!!!!!!!!!!!! And then digi loose a bag a customers. unless u r the CEO don't make such threats.

I'm sure digi pockets not burning from the over subscription that they are currently enjoying. Not to mention the poor regulation and poor consumer advocating bodies that Jamaica has.

Modding these devices to circumvent throttling is one thing but shutting down a forum that allows for true sharing of info would be as productive as shutting down the IEEE.

Plus if TJ goes, a dozen more will follow, some even dedicated to modding and nothing else.

kalel17
October 1, 2010, 10:05 PM
:icon_eek::icon_eek::icon_eek::icon_eek: *runs for moving truck, packs threads created and posts put up*


http://img33.imageshack.us/img33/8901/capybaraa.jpg (http://img33.imageshack.us/i/capybaraa.jpg/)

Him smell the rat... errrr finger

Seriously though that man is a mad man, mi fraid ah those rodent... bite bite up everything, u nuh c wat dem do to the banana trees here a couple years ago? Not even root lef... everything bite up.. lawd

richard_lyew
October 1, 2010, 10:43 PM
LMAO hahaaa mi cant du nothing but laugh, uno si wea mi did a tell uno and some a uno a talk bout from yu buy the modem a ur own and nobody can tell yu wea fi du wid it and badman a badman LMAO. now uno have a man wa lock dung Techjamaica fi 1 thread LOL mi cant believe sey this thread would be such a big deal, i mean i have seen people making a bunch of Digicel bashing threads and no problem but as soon as someone want to learn about the modem and what it can do its a big problem geez. bare warnings and bare things, man dem all a threaten Techjamaica and its moderators.

hail all mods, hear mi out. if dem a gu lock dung uno site fi mi one thread just tek it off and mi post it back pan a Afghan server. mi have webspace all over the world su a nu nothing fi re-post.

as fi the man wea a sen beer warnings and thing, wa yu fared a? yu know how weak and foolish yu look come pan di man dem thing a sen warnings and thing? yu know sey from yu mek a username pan di man dem site and logon dem have yu ip? easy yuself.

ina Ja real toppa top nu sen warning, things jus happen.

ram130
October 1, 2010, 10:48 PM
That is correct.

Anyone post anymore links to this thread with regards to modem modification, and i will have Techjamaica Shut Down. This is a MY WARNING!!!!!!

I hope this is clear to you all, I have served warning to your so-called Moderators and Administrators. If he fails to comply, i will have his house raided and Techjamaica shut down COMPLETELY.


We will not have hooligans modifying our modems tech. if you want to learn about Modem tech, join the IEEE and cease and desist modem modification. I am horrified that young people are engaged in this type of activity within our territorial waters. If you have a valid complaint against a Telecom Provider, either you write a letter of complain of your evidence to your respective Telecom Provider!!!!

:eusa_eh::eusa_eh: This is not Gizmodo (http://www.cbsnews.com/8301-504083_162-20003511-504083.html)...Who do you think you are? like really? You think you have a court case? :eusa_naug


That is correct.


We will not have hooligans modifying our modems tech.
At least I know who you work for now..:eusa_shif

jamtech
October 1, 2010, 11:10 PM
LMAO hahaaa mi cant du nothing but laugh, uno si wea mi did a tell uno and some a uno a talk bout from yu buy the modem a ur own and nobody can tell yu wea fi du wid it and badman a badman LMAO. now uno have a man wa lock dung Techjamaica fi 1 thread LOL mi cant believe sey this thread would be such a big deal, i mean i have seen people making a bunch of Digicel bashing threads and no problem but as soon as someone want to learn about the modem and what it can do its a big problem geez. bare warnings and bare things, man dem all a threaten Techjamaica and its moderators.

hail all mods, hear mi out. if dem a gu lock dung uno site fi mi one thread just tek it off and mi post it back pan a Afghan server. mi have webspace all over the world su a nu nothing fi re-post.

as fi the man wea a sen beer warnings and thing, wa yu fared a? yu know how weak and foolish yu look come pan di man dem thing a sen warnings and thing? yu know sey from yu mek a username pan di man dem site and logon dem have yu ip? easy yuself.

ina Ja real toppa top nu sen warning, things jus happen.

Yu just shut fi yu mouth to..........nobody nuh fraid ah him and digicel........it look like yu agree wid him, then yu a pretty up things.........yu and him guh dead a bush.....unnu bring on the lawsuit fools.

richard_lyew
October 1, 2010, 11:24 PM
Yu just shut fi yu mouth to..........nobody nuh fraid ah him and digicel........it look like yu agree wid him, then yu a pretty up things.........yu and him guh dead a bush.....unnu bring on the lawsuit fools.

lawd god help wi. first off mi neva sey it ok fi mod no modem or mess wid no network and never will. second, mi nu frade a no man. and how yu fi a wrath wid mi when the man a threaten mi to and a sen bear warnings and thing.

now uno know why mi did put up the disclaimer. :eusa_ange LMAO. being ont he safe side nu mean sey yu fraid

jamtech
October 1, 2010, 11:44 PM
lawd god help wi. first off mi neva sey it ok fi mod no modem or mess wid no network and never will. second, mi nu frade a no man. and how yu fi a wrath wid mi when the man a threaten mi to and a sen bear warnings and thing.

now uno know why mi did put up the disclaimer. :eusa_ange LMAO. being ont he safe side nu mean sey yu fraid

Then why yu a tell the mods fi remove the thread if yu a nuh coward?......yu only a give the fool power............mek it tan deh and mek di man dem duh dem modem mod.......digicel first bruck di contract by giving them a dirty lame service.

A suh mi know seh AA a coward yu nuh........mi caan beleive seh him remove di modem info......lawd gad.....lol.........hehehe....

Arch_Angel
October 1, 2010, 11:52 PM
A suh mi know seh AA a coward yu nuh........mi caan beleive seh him remove di modem info......lawd gad.....lol.........hehehe....What modem info? :eusa_thin

richard_lyew
October 2, 2010, 12:00 AM
Then why yu a tell the mods fi remove the thread if yu a nuh coward?......yu only a give the fool power............mek it tan deh and mek di man dem duh dem modem mod.......digicel first bruck di contract by giving them a dirty lame service.

A suh mi know seh AA a coward yu nuh........mi caan beleive seh him remove di modem info......lawd gad.....lol.........hehehe....

mi nu want my thread fi cause di man dem them whole site star, mi have mi account fi years and the FIRST thread mi mek badmind people wa lock dung di man dem site. a ffffery that star su if it a gu reach dea su jus tek it off and done.

@AA, all the links i have post are all free information that anyone with internet can get access to.

@the bully, is education bad or someone with education of how stuff works?
yu wish everybody did fool fool dont?

Arch_Angel
October 2, 2010, 12:14 AM
mi nu want my thread fi cause di man dem them whole site star, mi have mi account fi years and the FIRST thread mi mek badmind people wa lock dung di man dem site. a ffffery that star su if it a gu reach dea su jus tek it off and done.Don't worry about TechJ being shut down. If the information posted here is a breach of Digicel's terms (and we not wanting to have anything illegal on the site and ting), they probably would have contacted us to remove the thread already and asked us for your ip address and email. :D

jamtech
October 2, 2010, 12:35 AM
Don't worry about TechJ being shut down. If the information posted here is a breach of Digicel's terms (and we not wanting to have anything illegal on the site and ting), they probably would have contacted us to remove the thread already and asked us for your ip address and email. :D

Lol.....and I know you would happily send it to them.........

ram130
October 2, 2010, 12:47 AM
and thats why I mi ask if he thinks he got a court case..but him really sound like a digicel man in that last quote I made... :D

kevin1386
October 2, 2010, 02:21 AM
None of the information posted here seams Digicel specific it is general hardware. These concepts can be learn from a datasheet or other ad-hoc means. The ieee is made up crackers/hackers[Security Specialist] learning and improving is part of technology. The modem is sold to person isnt it? so it is own'd by them? they do with it as they please as long as it doesnt go outside the realm or service which digicel has put forward.

Unless Digicel is renting it......Them sneaky like that.

richard_lyew
October 2, 2010, 02:55 AM
Don't worry about TechJ being shut down. If the information posted here is a breach of Digicel's terms (and we not wanting to have anything illegal on the site and ting), they probably would have contacted us to remove the thread already and asked us for your ip address and email. :D

i mean its just general information about a piece of hardware being used all over the world. Capo think this modem was made by Digicel and for Digicel's network only? wake up you blasted idiot, the modem dea everywhere and the specs dea everywhere.

@AA, what if i wanted a specific user's ip, could you message it to me and not say? or just du like yu cant give mi but still gi mi?

Arch_Angel
October 2, 2010, 04:25 AM
@AA, what if i wanted a specific user's ip, could you message it to me and not say? or just du like yu cant give mi but still gi mi?Is whose yuh want so? Capy own? :icon_lol:

Bwoy this thread got derailed somewhere after that picture of a huge rat.

Can we somehow get back on topic? Think Capy got the point now. :eusa_pray

mega man
October 2, 2010, 02:26 PM
i have a digicel ip and god knows who it belongs to cause i can change them as i please, every know and then i use a few american ones to run hulu and equivalent sites, so if digi plan on finding me via ip thats a total waste of time, i was really going to post some info but if digi saw it they would pull the hair from them head and bawl, so i will let it be for know

@RICHARD

(hint)do you know how to lock the tsop, so that shut down ecm can't be sent to it, hahahahahahaaaa

ram130
October 2, 2010, 02:36 PM
if digicel want to find you. They will find you regardless of an ip change. So yes can we get back on track now, I want to continue learning..more modem talking plz!! :D

mega man
October 2, 2010, 02:45 PM
if digicel want to find you. They will find you regardless of an ip change

i would say something but that would only trigger my identity to a few techies who work with digi and they would be really pissed:D, but anyway back to moden talk like the man said

richard_lyew
October 2, 2010, 03:13 PM
i have a digicel ip and god knows who it belongs to cause i can change them as i please, every know and then i use a few american ones to run hulu and equivalent sites, so if digi plan on finding me via ip thats a total waste of time, i was really going to post some info but if digi saw it they would pull the hair from them head and bawl, so i will let it be for know

@RICHARD

(hint)do you know how to lock the tsop, so that shut down ecm can't be sent to it, hahahahahahaaaa

toooooooo easy man hahaaa mi find out that long before mi find out how fi turn off the OAM. yu have fi memba sey mi have sick info yu know yute.

mega man
October 2, 2010, 03:31 PM
hahahahaaa my yute mi rate yu, but yu know seh that a secret still, cause if digi know wah wi know a problem

richard_lyew
October 2, 2010, 06:02 PM
hahahahaaa my yute mi rate yu, but yu know seh that a secret still, cause if digi know wah wi know a problem

*kiss teeth* a simple thing that yute, look from when people a du dem thing dea. bunch of ways. yu can block it via a program in the flash itself or yu can jus du it the old way by switching off the write leg of the chip

http://digitallock.tripod.com/digilockPCB.jpg

its very simple just turn off the WE (write enable) leg of the Flash chip.
eg this will show a pic of a Flash chip's pinout and you will see the WE pin

http://img163.imageshack.us/img163/5641/flashchippinout.th.jpg (http://img163.imageshack.us/i/flashchippinout.jpg/)

to turn off the chip from being write to, just turn off the WE pin. i think thats the simplest way.

@mega man, if you have a easier way please share

ram130
October 2, 2010, 09:50 PM
i would say something but that would only trigger my identity to a few techies who work with digi and they would be really pissed:D, but anyway back to moden talk like the man said

:D:D nuh seh a word...anyway unno well smart..keep it up..hopefully digi will hire unno one day nuh true

g2cris
October 2, 2010, 10:15 PM
Is whose yuh want so? Capy own? :icon_lol:

Bwoy this thread got derailed somewhere after that picture of a huge rat.

Can we somehow get back on topic? Think Capy got the point now. :eusa_pray

Its not a rat its a Capybara (http://en.wikipedia.org/wiki/Capybara), rodent none the less

mega man
October 2, 2010, 11:22 PM
*kiss teeth* a simple thing that yute, look from when people a du dem thing dea. bunch of ways. yu can block it via a program in the flash itself or yu can jus du it the old way by switching off the write leg of the chip

http://digitallock.tripod.com/digilockPCB.jpg

its very simple just turn off the WE (write enable) leg of the Flash chip.
eg this will show a pic of a Flash chip's pinout and you will see the WE pin

http://img163.imageshack.us/img163/5641/flashchippinout.th.jpg (http://img163.imageshack.us/i/flashchippinout.jpg/)

to turn off the chip from being write to, just turn off the WE pin. i think thats the simplest way.

@mega man, if you have a easier way please share

just use the old simple way, solder the ground directly to the write protect, remember those clone viewsat, coolsat, pantec and pansat receivers its that old procedure to shut of the chip so no code could be sent to it after first write(so the kill code could damage the ird), but there is a draw back as in order to do certain stuff you have to power off and power back on once the time period past 20min(but wait who said that? hmmm it wasn't me) hahahahahahahaaaaa

disclaimer::D all info being shared is for the sole purpose of education, i have nothing to do with the end users action.

richard_lyew
October 3, 2010, 12:23 AM
just use the old simple way, solder the ground directly to the write protect, remember those clone viewsat, coolsat, pantec and pansat receivers its that old procedure to shut of the chip so no code could be sent to it after first write(so the kill code could damage the ird), but there is a draw back as in order to do certain stuff you have to power off and power back on once the time period past 20min(but wait who said that? hmmm it wasn't me) hahahahahahahaaaaa

disclaimer::D all info being shared is for the sole purpose of education, i have nothing to do with the end users action.

hahaaaa everybody have disclaimer now hahaaa but like yu sey this is all educational use only. yea turn off the WE and ground the WP yes sir.

http://img843.imageshack.us/img843/7067/flashchippinout1l.jpg (http://img843.imageshack.us/i/flashchippinout1l.jpg/)

dwih2007
September 27, 2011, 07:30 AM
hi i would love some help in getting the greenpacket ex250 modem admin password or how to jtag it or any information anybody may know about it digicel lock the modem web device manager and before i buy it i look on there website to see the features i would get and those are the feature they say i get while they lock everything when i call them they dont try to help once its the greenpacket ex250 modem they tell you that the modem dont have those features while they lock it anybody can help me with information please message me this is my new toy now cause i am not getting what i payed for me cant be paying $3100 per month for this garbage its time to unlock it we dont have nobody regulating them so we have to take matters in our own hand

it uses a HYNIX SEMICONDUCTOR - H27U518S2CTP-BC - MEMORY, FLASH, NAND, 512MB, 48TSOP

http://i345.photobucket.com/albums/p387/wittix/DSC00380.jpg this is inside the modem can you help me with this somebody

876
October 4, 2011, 01:35 AM
i am disturbed at that capycat actions or whatever his username was, lest he forget that the information is on the public domain, we as Jamaicans are free to express ourselves and free to share our views and information on various topics. This ofcourse is public knowledge of the said modems being mentioned. No one here is saying "go hack digi" or anything like that, no they arent. However they are just dissemination information available on the world wide web to persons with mutual interest.

May you guys should put things in APA format for capycat :)

Making sure to include your reference list etc lol.

He obviously needs a life, i mean, i no longer have a digi modem and really aint the modding type but i like to read and expand my knowledge in the field of network/software/hardware security, vulnerability etc. Even though i have never worked in the said field. I would just encourage my fellow techies to be careful in the wording of the post fi true. If u posting pics etc of u own modem block out info and make sure you upload pics to a overseas based server then provide pic or info from that. I wish techja would host their servers overseas to avoid our liable and copyright and other archaic laws. As once its hosted here ill be considered under Ja jurisdiction.

I have some words of advice for capy too,how could i forget that. Capy my dearest ratty, i think you should channel you energy to "raiding" the houses of those persons who are stealing our tax monies and those who have/are grant(ed)/ing exclusive license which i can only term as "sweet heart" deals. Oh and if you have a heart you should think about how the same company your defending is blatantly bias in its rates to customers of other networks,thus effectively limiting competition. Think about a network which havent lowered its rate in over 10 years. You gwan jump on digi band wagon, the thing with us Jamaicans is that we are too patriotic to things/people who mean us no good.

Unless i have a genetic link to the owners of any company in Jamaica ,i will not be patriotic to the said company. To hell with Digi yaw. Mi glad mi give up them modem as that was the slowest days my of my internet surfing life....BUFFERING >>>BUFFERING>>>BUFFERING... sounds/looks familiar?

Oh well lets get on with the sharing of PUBLIC knowledge...i just love to read. You can quote that specific line if u like capy when you go back to digi or if u decide to go court .**Smile**

chipmaster
October 25, 2011, 10:52 PM
*kiss teeth* a simple thing that yute, look from when people a du dem thing dea. bunch of ways. yu can block it via a program in the flash itself or yu can jus du it the old way by switching off the write leg of the chip

hi richard. is this the one you're using to turn on/off the WE pin of the chip? do you have a schematic diagram of this digilock? thanks

90 octane
October 27, 2011, 12:57 AM
wow that can be done

chipmaster
December 8, 2011, 01:00 AM
no update. is there anyone who knows the schematic in turning on/off the WE pin of flash chip using this digilock?

richard_lyew
December 13, 2011, 11:06 AM
soon do a new modem on a new thread

mega man
December 14, 2011, 08:36 PM
bwoy why is it that jamaicans always seem fi gwaan like them a saint, all the big tech countries mess with hacking and modding, its a way to discover flaws and vulnerabilities in devices, this is how they make better and more advance stuff, but i guess we jamaicans too boasy and rich, we try fi spend fi everything no wonder we inna so much death, now its not like the whole population is doing this or else it wouldn't be any fun :D. just a hint, its done the same way as locking any tsop chip;), hmmm what was it again grounds plus write protect or was it ground plus write enable, i know its one a dem :eusa_whis

King_Jay16
December 17, 2011, 09:01 PM
Boi this thread has gotten interesting indeed... lol...


http://files.overclock.net/images/smilies/offtopic.gif

But, has anyone tried messing with flow cable modems? It's so common here it nuh funny lol...

dwih2007
December 23, 2011, 11:12 AM
http://i345.photobucket.com/albums/p387/wittix/modem.jpg please help me identify the jtag pinout on the greenpacket ex250 modem can you tell me a good jtag utility to use i want to open two ports that are locked in the modem

wiel
December 25, 2011, 07:12 PM
what is the name of the config backup file or how can i make one? tried to do a back-up through telnet but i keep getting "command not found" messages.
i need to backup in case of a fire :o

richard_lyew
February 25, 2012, 08:41 PM
lol you guys still modding these modems?. i came back to ja and notice they took them off the market LOL

jaydaze
December 22, 2012, 08:54 AM
lol you guys still modding these modems?. i came back to ja and notice they took them off the market LOL

seeking some info also on the ex250. willing to share pls dm.

Respek :)

876
December 24, 2012, 03:05 AM
if there is anyone willing to share their expertise in how to open these modems, also how to use fl()w internet modem for free or how to get free net on digi 4g mobile or how to bypass their usage limits etc or cable modem stuff or anything,just pm me and depends on info u can share or provide then $$$ ur way. Only using for "informational purposes"

mega man
December 27, 2012, 11:42 PM
if there is anyone willing to share their expertise in how to open these modems, also how to use fl()w internet modem for free or how to get free net on digi 4g mobile or how to bypass their usage limits etc or cable modem stuff or anything,just pm me and depends on info u can share or provide then $$$ ur way. Only using for "informational purposes"

i'm asuming you know flow puts people in jail for such a mod(anyway i have no chips now lol) as for the digi modems its a hands on job to mod it and i'm not willing to put my self out of the way so i can be arrested lol, if i'd known you(meaning you live in my zone) then i'd consider helping out lol,

disclaimer: my knowledge is for the sole use of my entertainment and educational use, i have no intention of mis-leading the public, the gang of 5 is a private pirate group, what ever we do if for our benefit lol

richard_lyew
March 27, 2013, 05:26 PM
i'm asuming you know flow puts people in jail for such a mod(anyway i have no chips now lol) as for the digi modems its a hands on job to mod it and i'm not willing to put my self out of the way so i can be arrested lol, if i'd known you(meaning you live in my zone) then i'd consider helping out lol,

disclaimer: my knowledge is for the sole use of my entertainment and educational use, i have no intention of mis-leading the public, the gang of 5 is a private pirate group, what ever we do if for our benefit lol

LMAO i love your disclaimer.

comptech
March 31, 2013, 06:54 PM
disclaimer shot but serously though them need to stop short changing ppl den ergo wi wud mod jus because and not because u a rob wi in the first place